Thursday, 3 May 2018

How to open port on mikrotik winbox

How to open port on mikrotik winbox

How to port forwarding in MikroTik router? Why does my MikroTik router listen to certain ports? Right-click empty space and click Add. Type the port number that you wish to open into the Dst Port box. Firewall menu, choose NAT tab, make a new rule.


In the newly opened window , you can see all of the ports that are used by MikroTik to be connected online. Double click on the port that you wish to change the port number. Set the number in the port field and click on “OK”.


Port Forwarding to Internal SSH Server. Login to MikroTik Router using Winbox with admin privilege credential. New NAT Rule window will appear.


In General tab, choose dstnat from Chain dropdown menu. Let’s say you have a DVR that has a static IP of 192. Modify the Chain to dstnat, Protocol to tcp, and Dst.


Winbox is a small utility that allows administration of MikroTik RouterOS using a fast and simple GUI. It is a native Winbinary, but can be run on Linux and MacOS (OSX) using Wine. All Winbox interface functions are as close as possible mirroring the console functions, that is why there are no Winbox sections in the manual. If you are on a network under MikroTik, sometimes you need to access your local network’s web service port, FTP port, RDP port and any other port from internet. In this case, you need to tell your network administrator to forward specific port to any specific machine’s port.


IT Support Engginer semoga bermanfaat. New window will be appear on you display as you see below. Connect to your MikroTik. Using Winbox, connect to your MikroTik router to change the configuration for NAT port forward. Configure NAT in MikroTik.


Select dstnat chain. Port knocking is a method that enables access to the router only after receiving a sequenced connection attempts on a set of prespecified closed ports. Once the correct sequence of the connection attempts is receive the RouterOS dynamically adds a host source IP to the allowed address list and You will be able to connect your router. Then from Protocol.


Change Chain to input. Also be sure you know the port (s) you want to forward. Secon continue on to the NAT tab of the firewall. You would have to add an ‘input’ rule for port to reach the webgui. After that, in the firewall, a rule will be created at the end of the list.


It should not delete the packets or assign a vlan to them. Click “OK” to add a rule. All other ports should just be the default untagged and be left that way. I want to do this with WinBox for configuration.


You can also enter the port number after the IP address, separating them with a colon, like this 192.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.